Category: Retrogaming
NESPi Project Part 3 – Video output and DC input board
In my opinion this is the hardest and most boring part of the whole project, but the result will be rewarding! In this post I will show you how to use acrylic plastics to make a board where we can glue extensions cables in a practical and good-looking way. Quick Guide Saw pieces of acrylic […]
NESPi Project Part 2 – The Case, bottom part
In the second part we will look at the bottom case. How to unscrew all electronics and how to clean and restore the case. Quick Guide Remove all components in the bottom case. Clean the case, protect all original stickers with covering plastics. Step 1 – Remove All the Components Remove the screws holding the […]
NESpi Project Part 1 – The Case, top part
This is the first blog post in a series about how to put a Raspberry Pi inside of an original NES case. The goal is to follow the principles to not damage the hardware and to keep the look and feel of an authentic NES. Quick Guide Take apart the Case. Glue together cracks (if […]